Find the Right Polaris RZR 1000 Oil Type: A Comprehensive Guide

Introduction: What Kind of Oil Does a Polaris RZR 1000 Take?

Finding the appropriate oil and fluids for your vehicle is crucial for its performance and longevity, and when it comes to the Polaris RZR 1000, the task is no different. Selecting the correct Polaris RZR 1000 oil type is vital for optimum functionality. But that’s not all; understanding the RZR 1000 transmission fluid type, Polaris General 1000 oil type, and RZR 1000 front diff fluid type is equally important. This comprehensive guide is tailored to provide detailed insights into the Polaris RZR 1000 oil, ensuring that your vehicle receives the care and attention it deserves. From the essential RZR 1000 oil type to the specifics of Polaris RZR oil, we’ve got everything covered to keep your ride smooth and efficient. Let’s dive into the world of Polaris RZR 1000’s oil and fluid specifications and explore the best options available.

What Kind of Oil to Use

When it comes to choosing the right oil for your Polaris RZR 1000, it’s important to use oil that is specifically designed for high-performance vehicles like yours. The recommended oil for a Polaris RZR 1000 is the PS-4 oil.

How to Change the Oil

Changing the oil on your Polaris RZR 1000 is a relatively simple process that you can do yourself. Here are the steps to follow:

  1. Position the vehicle on a flat, level surface.
  2. Place the vehicle in PARK and start the engine. Allow it to warm up at idle for 2 to 3 minutes.
  3. Stop the engine and remove the cargo box access panel. Clean the area around the drain plug.
  4. Place a drain pan under the engine crankcase and remove the drain plug with a 6mm Allen socket. Allow the oil to drain completely.
  5. Remove the oil filter access panel and use a 2.5-inch (64mm) oil filter wrench to remove the oil filter. Clean the filter sealing surface on the crankcase.
  6. Install a new filter, lubricating the O-ring with a film of fresh engine oil.
  7. Inspect the drain plug and sealing surfaces before reinstalling the drain plug with a new sealing washer. Tighten it to 12 ft-lbs (16 Nm).
  8. Fill the engine with 2.5 quarts (2.4 liters) of PS-4 oil through the oil fill cap.
  9. Reinstall the oil fill cap, cargo box access panel, and seats.
  10. Start the engine and allow it to idle for 1 to 2 minutes. Stop the engine and inspect for leaks.
  11. Check the oil level and add oil as needed to bring it to the upper mark on the dipstick.
  12. Wipe up any residual oil that may have collected on vehicle components.

Other Maintenance Tips

In addition to changing the oil, there are a few other maintenance tasks you should perform on your Polaris RZR 1000. Here are some tips:

  1. Grease the propshaft through the rear wheel well and under the center console.
  2. Clean the spark arrestor regularly by removing it and using an 8mm socket to loosen the fastener.
  3. Check the service interval counter on the instrument cluster and reset it when needed.



Knowing what kind of oil to use for your Polaris RZR 1000 is essential for maintaining the performance and longevity of your vehicle. By following the recommended oil change procedure and performing regular maintenance tasks, you can ensure that your Polaris RZR 1000 stays in great shape for years to come.


What kind of oil does RZR 1000 take?

The Polaris RZR 1000 typically takes Polaris PS-4 Extreme Duty Full Synthetic 10W-50 Engine Oil for its oil change. This oil is specifically formulated for Polaris engines and provides the necessary lubrication and protection for the high-performance demands of the RZR 1000. You can find oil change kits that include the required amount of oil, such as the Polaris Full Synthetic Oil Change Kit, which usually contains 3 quarts of the recommended PS-4 Extreme Duty Full Synthetic 10W-50 Engine Oil. As always, refer to your vehicle’s owner’s manual and follow the manufacturer’s recommendations for the best oil to use and proper maintenance procedures.

What oil do you use in a Polaris RZR?

The recommended engine oil for a Polaris RZR Pro R is Polaris PS-4 Extreme Duty Full Synthetic 0W-50 Engine Oil. This oil is formulated by Polaris to provide the necessary lubrication and protection for the RZR Pro R’s engine under various operating conditions. Always refer to your vehicle’s owner’s manual for the most accurate and up-to-date information regarding oil specifications and maintenance recommendations for your specific RZR model. Using the recommended oil will help ensure optimal performance and longevity of your vehicle.

What weight is Polaris ps4 oil?

Polaris PS-4 Full Synthetic 5W-50 Engine Oil is formulated with a viscosity rating of 5W-50. This means that the oil has a viscosity of 5 at low temperatures (W stands for Winter), which ensures easy cold starts and proper lubrication during cold weather. The viscosity of 50 at high temperatures ensures that the oil maintains stability and provides adequate lubrication under the heat generated by the engine during operation. This type of oil is designed to work well in a variety of temperatures and conditions, making it suitable for a range of off-road applications, including Polaris vehicles like the RZR.

Can I use car oil in my Polaris ATV?

Using car oil in a Polaris ATV is not recommended. Automotive oils are designed for the specific needs of car engines, which often operate at different RPMs, temperatures, and loads compared to ATV engines. ATV engines, transmissions, and clutches have different requirements and performance characteristics that may not be met by automotive oils.
Using the correct oil, such as the manufacturer-recommended Polaris oils like PS-4 Extreme Duty Full Synthetic or other suitable oils specifically designed for ATVs, ensures proper lubrication, cooling, and protection of the engine and drivetrain components. Using the wrong oil could lead to reduced performance, premature wear, and even potential engine or transmission damage.
Always refer to your ATV’s owner’s manual for the recommended oil specifications and follow the manufacturer’s guidelines to ensure the longevity and reliability of your ATV.

Can I use synthetic oil in my UTV?

Yes, you can certainly use synthetic oil in your UTV (Utility Terrain Vehicle). Synthetic oils are known for their enhanced performance and stability, particularly in extreme conditions. They offer several advantages that can be beneficial for UTV engines:
Temperature Stability: Synthetic oils are formulated to maintain their viscosity and performance across a wide range of temperatures, from extreme heat to cold conditions. This stability helps ensure consistent lubrication and protection, even in challenging environments.
Resistance to Breakdown: Synthetic oils typically have higher resistance to oxidation and thermal breakdown compared to conventional oils. This means they can last longer between oil changes and provide better protection against engine wear.
Reduced Friction: Synthetic oils often have better lubricating properties, which can result in reduced friction and less engine wear over time. This is particularly important in high-performance UTV engines.
Cold-Start Performance: Synthetic oils flow more easily at cold temperatures, which improves cold-start performance and reduces engine wear during those critical moments.
Cleaner Engine: Synthetic oils tend to have fewer impurities and contaminants, which can help keep the engine cleaner and reduce the formation of sludge and deposits.
Before using synthetic oil in your UTV, it’s essential to check your UTV’s owner’s manual for the manufacturer’s recommendations. Most UTVs can benefit from using high-quality synthetic oils, but it’s crucial to ensure that the specific synthetic oil you choose meets the manufacturer’s specifications for your UTV model. Using the right oil will help ensure optimal performance, protection, and longevity for your UTV’s engine.

Can I put 5W30 in my ATV?

Using 5W-30 oil in your ATV can depend on the manufacturer’s recommendations and the operating conditions of your ATV. While 5W-30 is a common viscosity used in automotive engines, it’s important to consider the specific requirements of your ATV’s engine.
Here are a few points to consider:
Manufacturer Recommendations: The best practice is to follow the oil viscosity recommendations provided by the manufacturer in your ATV’s owner’s manual. Manufacturers often choose specific viscosities based on the design and operating conditions of the engine.
Temperature Range: Oil viscosity, represented by the numbers before the “W,” indicates how the oil flows at different temperatures. A lower number indicates better cold-flow performance. If your ATV operates in colder temperatures, a lower first number (0W or 5W) can improve cold-start performance.
Operating Conditions: ATV engines are designed to perform in various conditions, including temperature extremes and varying loads. The recommended oil viscosity takes into account the engine’s design and intended usage.
Oil Performance: While 5W-30 might be suitable in some cases, it’s essential to choose an oil that provides the necessary protection, lubrication, and temperature stability for your ATV’s engine. Some ATVs may benefit from using oils with different viscosities based on their design and usage.
Ultimately, it’s advised to follow the manufacturer’s recommendations to ensure the best performance, protection, and longevity for your ATV’s engine. If you’re considering using a different oil viscosity than what’s recommended, it’s a good idea to consult your ATV’s manufacturer or a qualified mechanic who is familiar with your specific ATV model.

We will be happy to hear your thoughts

Leave a reply

polaris oil
Compare items
  • Total (0)