2020 CFMOTO UFORCE 1000

Introduction

The utility side-by-side market is highly competitive, with numerous options available from different manufacturers. While sport-oriented models and turbocharged machines often steal the spotlight, it’s the utility models that sell the most. CFMoto, a Chinese manufacturer, offers three utility models, including the 2020 CFMOTO UFORCE 1000. In this article, we will take a closer look at the UFORCE 1000, its features, performance, and how it compares to other top manufacturers in the industry.

More for the Money

When purchasing the UFORCE 1000, you get a long list of standard features that are often not included with other manufacturers’ models. This includes two side mirrors and a horn, which are typically not standard on utility machines. Additionally, the UFORCE 1000 comes equipped with a 3500-pound winch that has both wired and wireless remotes. The tires on this machine are CST Stags, which are known for their quality and performance.

Other notable features of the UFORCE 1000 include a 2-inch receiver and bumper at the front, which is a unique and useful standard feature. The rear of the machine features a large dumping cargo bed with tie-down hooks and inch marks on the tailgate, allowing for easy measurement of materials. Under-seat storage with a removable box, a removable backrest on the passenger seat that can be used as a cushion or kneeling pad, and a dash with shelves and cup holders are all included in the UFORCE 1000’s cockpit. The third seatback folds out of the way when not needed, revealing an armrest and cup holders.

Plenty of Power

The UFORCE 1000 is powered by an eight-valve, liquid-cooled, four-stroke V-twin engine, which is similar to what is seen in Can-Am machines. This powerplant produces 79 horsepower and 60 pound-feet of torque, providing ample power for various tasks. During testing, the UFORCE 1000 demonstrated impressive speed, reaching a top speed of over 75 mph. However, for a machine of this size and type, speeds around 60 mph are more suitable.

At slower speeds, it was evident that the UFORCE 1000 is geared high. Driving in low gear was necessary to prevent belt overheating, as the throttle was choppy and taking off smoothly was a bit challenging. It would be beneficial if the UFORCE 1000 had an electronic work mode to provide smoother low-end power delivery.

Soft Suspension

The UFORCE 1000 is set up with a plush suspension, which can be adjusted to reduce body roll and improve handling. By cranking the shock spring preload to one setting below full stiff, the UFORCE 1000 exhibited reduced body roll and improved turning. Ground clearance was also increased to 11.4 inches, providing ample clearance for off-road obstacles.

While CFMoto does not provide specific wheel-travel numbers, it is estimated that the UFORCE 1000 has approximately 10 inches of travel on each corner. Suspension action is comparable to that of the Can-Am Defender or Polaris Ranger, making it suitable for its intended use. However, it’s important to keep speeds at around half of what the motor is capable of to ensure optimal suspension performance.

Conclusions

Overall, the UFORCE 1000 offers excellent value for the price. With a starting price of $11,999, it includes a range of standard features that are often not found on other utility machines. While there are some minor areas for improvement, such as a stronger tailgate and better clutch tuning for smoother low-speed rides, the UFORCE 1000 delivers on its promise of providing a capable and affordable utility side-by-side.

For those looking to save thousands of dollars without compromising on performance or features, the UFORCE 1000 is a compelling option. Visit a CFMoto dealer near you to see the UFORCE 1000 for yourself and experience its capabilities firsthand.

Specifications:

  • MSRP: $11,999
  • Engine type: Liquid-cooled V-twin 4-stroke
  • Transmission: Fully Auto CVTech CVT
  • Fuel system: Bosch EFI
  • Starting: Electric
  • Final drive: Shaft
  • Suspension/wheel travel:
  • Front: Double A-arm w/10”
  • Rear: Double A-arm w/10”
  • Tires:
  • Front: 27×9-14
  • Rear: 27×11-14
  • Brakes:
  • Front: Hydraulic disc
  • Rear: Hydraulic disc
  • Wheelbase: 80.7”
  • Length/width/height: 117”x63.5”x72.8”
  • Turning radius: 26.9’
  • Ground clearance: 11.4”
  • Curb weight: 1520 lb.
  • Fuel capacity: 10.6 gal.
  • Hitch receiver: 2”
  • Cargo capacity: 1000 lb.
  • Towing capacity: 2000 lb.
  • Winch capacity: 3500 lb.

Contact:

Visit cfmotousa.com to find a dealer near you and learn more about the 2020 CFMOTO UFORCE 1000.

We will be happy to hear your thoughts

Leave a reply

polaris oil
Logo
Compare items
  • Total (0)
Compare
0